The sizes available are
12 feet, 16 feet and 20
feet.
Made of 18 gauge steel.
The unit weights
are 196 lbs, 227 lbs, and 256 lbs
respectively.
The wheel is 6
feet in diameter.
Very little wind is needed to start the windmill
and it is
self-governing for extreme wind conditions.
How to replace the rubber washers
The Diaphragm Compressor:
The air pump consists of a diaphragm compressor.
It produces higher pressure than the bellows pump and Outdoor Water
Solutions has engineered the windmill to generate approximately 3.5 to
4 cfm.
The Diffuser:
The stone diffuser is critical to aerating your pond. The
smaller air bubbles make it easier for the oxygen to be diffused into
the water. The diffuser should be placed on the bottom of the
pond at or near the deepest point. It is also important to place
the diffuser inside a 5 gallon pail to keep it from getting clogged
with the muck on the bottom. Tie a rope to the pail and the
airline for easy retrieval.
The Warranty:
5
Years -Outdoor Water Solutions will
cover any major mechanical defect inside our compressor, like bearings
or our camshaft for five full years from the date of purchase.
3 Years - Outdoor
Water Solutions will also cover all other parts for a period of three
years from date of purchase against defects in workmanship or
material.
Prices:
12' Outdoor Water
Solutions Aeration Windmill
Includes Air Diffuser Stone, 100' of 1/2"
Floating Air Hose, and Foot Valve.
$1295
16' Outdoor Water
Solutions Aeration Windmill
Includes Air Diffuser Stone, 100' of 1/2"
Floating Air Hose, and Foot Valve.
$1395
20' Outdoor Water
Solutions Aeration Windmill
Includes Air Diffuser Stone, 100' of 1/2"
Floating Air Hose, and Foot Valve.
$1495
24' Outdoor Water Solutions
Leg Extension Kit
Attaches
to 20' Windmill
Call for
Powder-Coated Extension ($200)
$100
Windmills, Fountains, Aerators, Pumps, Parts, and Pond Cleaning
Bacteria
